352-001, Cisco 352-001 Exam
產品介紹
考試代碼: 352-001
考試名稱: ADVDESIGN
352-001 考試是 Cisco 公司的 ADVDESIGN 認證考試官方代號，CramBible 352-001由全球領先的IT認證考試中心授權，幫助考生一次順利取得通過352-001考試； 否則將全額退款！保證您的利益不受到任何的損失。
總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對考試題庫的完整覆蓋。
更多 352-001 資源
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1. According to the network in this exhibit, traffic directed towards
10.1.5.1 arrives at TIS-R4. Which path will the traffic take from here?
A. It will take TIS-R2.
B. It will not take any path. TIS-R4 will drop the traffic.
C. It will take TIS-R3.
D. It will load share between TIS-R2 and TIS-R3.
Answer: A
2.The TIS company is deploying OSPF on a point-to-multipoint Frame Relay network. The remote sites needn??t to communicate with each other and there are a relatively small number of sites (scaling is not a concern).
How to configure OSPF for this topology in order to minimize the additional routing information injected into the network and keep the configuration size and complexity to a minimum?
A. Configure the link as OSPF nonbroadcast and manually configure each of the remote sites as a neighbor.
B. Configure the link as OSPF broadcast and configure the hub router to always be the designated router.
C. Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.
D. Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers as OSPF point-to-point.
Answer: B
3. You are the Cisco Network Designer in certways.com. Which two characteristics are most typical of a SAN? (Choose two.)
A. NICs are used for network connectivity.
B. Servers request specific blocks of data.
C. Storage devices are directly connected to servers.
D. A fabric is used as the hardware for connecting servers to storage devices.
Answer: BD
4. Lafeyette Productions is looking for a new ISP that has improved availability, load balancing, and catastrophe protection. Which type of ISP connectivity solution would be best?
A. single run
B. multi-homed
C. stub domain EBGP
D. direct BGP peering
Answer: B
5. What is high availability?
A. redundant infrastructure
B. clustering of computer systems
C. reduced MTBF
D. continuous operation of computing systems
Answer: D
6. What is the way that an OSPF ABR uses to prevent summary route information from being readvertised from an area into the network core (Area 0)?
A. It advertises only inter-area summaries to the backbone.
B. It uses poison reverse and split horizon.
C. It only sends locally originated summaries to the backbone.
D. It compares the area number on the summary LSA to the local area.
Answer: C
7. Connecting an IS-IS router to four links and redistributing 75 routes from RIP.
How many LSPs will be originated by this router?
A. one LSP: containing the router information, internal routes, and external routes
B. six LSPs: one for each link, one containing router information, and one containing external routing information
C. two LSPs: one containing router information and internal routes and one containing external routes
D. three LSPs: one containing all links, one containing router information, and one containing external routing information
Answer: A
8. NetFlow provides valuable information about network users and applications, peak usage times, and traffic routing. Which function is of NetFlow?
A. monitor configuration changes
B. monitor CPU utilization
C. monitor link utilization
D. generate traps for failure conditions
Answer: C
?>
A. It will take TIS-R2.
B. It will not take any path. TIS-R4 will drop the traffic.
C. It will take TIS-R3.
D. It will load share between TIS-R2 and TIS-R3.
Answer: A
2.The TIS company is deploying OSPF on a point-to-multipoint Frame Relay network. The remote sites needn??t to communicate with each other and there are a relatively small number of sites (scaling is not a concern).
How to configure OSPF for this topology in order to minimize the additional routing information injected into the network and keep the configuration size and complexity to a minimum?
A. Configure the link as OSPF nonbroadcast and manually configure each of the remote sites as a neighbor.
B. Configure the link as OSPF broadcast and configure the hub router to always be the designated router.
C. Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.
D. Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers as OSPF point-to-point.
Answer: B
3. You are the Cisco Network Designer in certways.com. Which two characteristics are most typical of a SAN? (Choose two.)
A. NICs are used for network connectivity.
B. Servers request specific blocks of data.
C. Storage devices are directly connected to servers.
D. A fabric is used as the hardware for connecting servers to storage devices.
Answer: BD
4. Lafeyette Productions is looking for a new ISP that has improved availability, load balancing, and catastrophe protection. Which type of ISP connectivity solution would be best?
A. single run
B. multi-homed
C. stub domain EBGP
D. direct BGP peering
Answer: B
5. What is high availability?
A. redundant infrastructure
B. clustering of computer systems
C. reduced MTBF
D. continuous operation of computing systems
Answer: D
6. What is the way that an OSPF ABR uses to prevent summary route information from being readvertised from an area into the network core (Area 0)?
A. It advertises only inter-area summaries to the backbone.
B. It uses poison reverse and split horizon.
C. It only sends locally originated summaries to the backbone.
D. It compares the area number on the summary LSA to the local area.
Answer: C
7. Connecting an IS-IS router to four links and redistributing 75 routes from RIP.
How many LSPs will be originated by this router?
A. one LSP: containing the router information, internal routes, and external routes
B. six LSPs: one for each link, one containing router information, and one containing external routing information
C. two LSPs: one containing router information and internal routes and one containing external routes
D. three LSPs: one containing all links, one containing router information, and one containing external routing information
Answer: A
8. NetFlow provides valuable information about network users and applications, peak usage times, and traffic routing. Which function is of NetFlow?
A. monitor configuration changes
B. monitor CPU utilization
C. monitor link utilization
D. generate traps for failure conditions
Answer: C
用户反馈
- I passed the CCDE exam last week, my score is 972/1000.
Passing the exam makes me very happy. Of course, the most important thing is that the score makes me very satisfied.
This confirms my long-term effort.
The study materials I used are CCDP Study Guide and the Crambible tests
Before the exam, I used the CramBible tests to examine how well I master the knowledge points.
So the result is within my expectations.
Good luck and wish you passing the exam successfully!
-
I passed the exam of 352-001 today, my score is 988/1000.
The exam is relatively easy.
I have passed the exams of CCDA and CCDP before taking the CCDE exam.
I spent three weeks on preparation for the exam.
The study material I used is the study guide and the CramBible tests.
Most time is spent on tests, thus I can prepare the exam more efficiently.
That’s all.
- The exam of 352-001 is finished. Nearly a month of preparation is end. My score is 956/1000.
The demand of CCDE for mastering the knowledge points is very strict, the candidates must know some major technologies such as routing, security, voice and wireless. So I think CCDE is very valuable, it is a good choice.
I spent about a month on preparations for the exam. The study materials I used are Study Guide and study resources collected from forum, the key is to do Crambible tests which make you know the exam more clearly. So, I think the exam is very easy.
I hope the information I give can help you!
線上諮詢,點擊進入