642-813, Cisco 642-813 Exam

研發團隊致力於國際上最新的各種IT認證，根據最新考試中心截屏所得原始題庫，IT培訓中心和考試中心IT工程師和IT認證專家精心整理製作完成各種IT認證題庫;我們密切跟蹤IT認證的最新動態和考試變化，及時提供最新的試題升級，覆蓋率100％以上,保證您一次通過認證考試。

我們如何保持100％通過率的產品?

我們在題庫致力於客戶的成功。我們的產品出品極為謹慎和專業。我們利用來自世界各地的業界領先的組織專業人員隊伍的經驗和知識。

'客戶的成功就是我們的成功'

642-813 考試是 Cisco 公司的 Implementing Cisco IP Switched Networks (SWITCH) 認證考試官方代號，CramBible的 642-813 權威全真題庫是 Cisco 認證廠商的授權產品，絕對保證第一次參加 642-813 考試的考生即可順利通過，否則將全額退款！保證您的利益不受到任何的損失。

CramBible確保您的成功，否則全額退款!

產品介紹

Implementing Cisco IP Switched Networks (SWITCH) 認證作為全球IT領域專家 Cisco 熱門認證之一，是許多大中IT企業選擇人才標準的必要條件。 如果您正在準備 642-813 考試，CramBible是您成功的最佳夥伴;最新642-813權威全真考題題庫,幫助您一次通過Cisco認證考試。

根據642-813考試的變化動態更新，所有購買CramBible 642-813認證考題的客戶都將得到90天的免費升級服務，保證了對642-813考試題庫的完整覆蓋。

總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的認證CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對642-813考試題庫的完整覆蓋。

我如何用你們的產品通過考試?
CramBible產品足以通過考試。 我們建議學員學習CramBible7天時間，將幫助您評估您的實際考試前的準備。 。

如何下載產品?
產品可以下載很容易從會員的帳戶，登錄後點擊訂購代碼或“查看”按鈕，開始下載。

產品是什麼格式的?
Adobe Acrobat PDF 文件.您下載的檔為RAR壓縮格式. 請訪問Winrar tool 3.0 plus version 解壓縮檔後用Adobe Acrobat reader閱讀

忘記密碼?
請訪問找回密碼.
輸入您的用戶名，我們會向您發送一封含有密碼的電子郵件.

我怎樣才能得到優惠？
如果您購買的是3個或3個以上的產品,請發電子郵件到 sales@crambible.com，將為您提供提供一個優惠的價格。

如果我失敗了怎麼辦？
不要擔心失敗;為您提供沒有通過考試的退款保證。 你無法通過相應的考試，可以要求退款的保證。點擊這裡更多細節。

需要幫助？
您可以隨時與客戶支援聯繫

線上諮詢,點擊進入 每天9:00-18:00

閱讀完整的常見問題解答

1. 選擇產品加入購物車
通過 "搜索" or "所有產品" 找到您需要的產品, 點擊"Add to cart" 按鈕, 加入購物車.

2. 登錄帳戶
點擊 頁面頂部的 "註冊" 按鈕, 成為本網站的正式成員。 （已註冊用戶，可以點擊“登錄”直接。）

3. 付款
我們提供的付款方式包括 線上支付（Visa/Master/Paypal） 和 西聯匯款。 大多數客戶使用線上支付，購買過程支持各種信用卡和銀行借記卡付款。沒有任何額外費用。

4. 下載
確認付款後，您可以即刻訪問您的會員中心，下載產品。

                   
QUESTION NO: 1
Company uses layer 3 switches in the Core of their network. Which method of Layer 3 switching uses a
forwarding information base (FIB)?

A. Topology-based switching
B. Demand-based switching
C. Route caching
D. Flow-based switching
E. None of the other alternatives apply

Answer: A

Explanation:
The Layer 3 engine (essentially a router) maintains routing information, whether from static routes or
dynamic routing protocols. Basically, the routing table is reformatted into an ordered list with the most
specific route first, for each IP destination subnet in the table. The new format is called a Forwarding
Information Base (FIB) and contains routing or forwarding information that the network prefix can reference.
In other words, a route to 10.1.0.0/16 might be contained in the FIB, along with routes to 10.1.1.0/24 and
10.1.1.128/25, if those exist. Notice that these examples are increasingly more specific subnets. In the FIB,
these would be ordered with the most specific, or longest match, first, followed by less specific subnets.
When the switch receives a packet, it can easily examine the destination address and find the longest match
entry in the FIB. The FIB also contains the next-hop address for each entry. When a longest match entry is
found in the FIB, the Layer 3 next-hop address is found, too.



QUESTION NO: 2

You need to design the VLAN scheme for the Company network. Which two statements are true about
best practices in VLAN design? (Select two)

A. Routing should occur at the access layer ifvoice VLANs are utilized. Otherwise, routing should occur at
the distribution layer.
B. Routing should always be performed at the distribution layer.
C. VLANs should be localized to a switch.
D. VLANs should be localized to a single switch unlessvoice VLANs are being utilized.
E. Routing should not be performed between VLANs located on separate switches.                                                                                                    
Answer: B,C

Explanation:
In the distribution layer, uplinks from all access layer devices are aggregated, or come together. The
distribution layer switches must be capable of processing the total volume of traffic from all the connected
devices. These switches should have a port density of high-speed links to support the collection of access
layer switches. VLANs and broadcast domains converge at the distribution layer, requiring routing,
filtering, and security. The switches at this layer must be capable of performing multilayer switching with
high throughput. Only certain Catalyst switch models can provide multilayer switching; be sure to
understand which ones can do this.
A switched environment offers the technology to overcome flat network limitations. Switched networks can
be subdivided into VLANs. By definition, a VLAN is a single broadcast domain. All devices connected to the
VLAN receive broadcasts from other VLAN members. However, devices connected to a different VLAN will
not receive those same broadcasts. (Naturally, VLAN members also receive unicast packets directed toward
them from other VLAN members.)

A VLAN consists of defined members communicating as a logical network segment. In contrast, a physical
segment consists of devices that must be connected to a physical cable segment. A VLAN can have connected
members located anywhere in the campus network, as long as VLAN connectivity is provided between all
members. Layer 2 switches are configured with a VLAN mapping and provide the logical connectivity
between the VLAN members.

QUESTION NO: 3
Refer to the exhibit. On the basis of the information provided in the exhibit, which two sets of
procedures are best practices for Layer 2 and 3 failover alignment? (Choose two.)
A. Configure the D-SW1 switch as the active HSRP router and the STP root for all VLANs.
Configure the D-SW2 switch as the standby HSRP router and backup STP root for all VLANs.
B. Configure the D-SW1 switch as the standby HSRP router and the STP root for VLANs 11 and
110. Configure the D-SW2 switch as the standby HSRP router and the STP root for VLANs 12 and
120.
C. Configure the D-SW1 switch as the active HSRP router and the STP root for VLANs 11 and
110. Configure the D-SW2 switch as the active HSRP router and the STP root for VLANs 12 and
120.
D. Configure the D-SW2 switch as the active HSRP router and the STP root for all VLANs.
Configure the D-SW1 switch as the standby HSRP router and backup STP root for all VLANs.
E. Configure the D-SW1 switch as the active HSRP router and the backup STP root for VLANs 11
and 110. Configure the D-SW2 switch as the active HSRP router and the backup STP root for
VLANs 12 and 120.
F. Configure the D-SW1 switch as the standby HSRP router and the backup STP root for VLANs
12a nd 120. Configure the D-SW2 switch as the standby HSRP router and the backup STP root
for VLANs 11 and 110.

Answer: C,F

Explanation:
Basically, each of the routers that provides redundancy for a given gateway address is assigned to a common
HSRP group. One router is elected as the primary, or active, HSRP router, another is elected as the standby                                                                     
HSRP router, and all the others remain in the listen HSRP state. The routers exchange HSRP hello messages
at regular intervals, so they can remain aware of each other's existence, as well as that of the active router.


HSRP election is based on a priority value (0 to 255) that is configured on each router in the
group. By default, the priority is 100. The router with the highest priority value (255 is highest)
becomes the active router for the group. If all router priorities are equal or set to the default value,
the router with the highest IP address on the HSRP interface becomes the active router. To set the
priority, use the following interface configuration command:
Switch( config-if)# standby group priority priority

When HSRP is configured on an interface, the router progresses through a series of states before
becoming active. This forces a router to listen for others in a group and see where it fits into the
pecking order. The HSRP state sequence is Disabled, Init, Listen, Speak, Standby, and, finally,
Active.
You can configure a router to preempt or immediately take over the active role if its priority is the
highest at any time. Use the following interface configuration command to allow preemption:
Switch( config-if)# standby group preempt [delay seconds]


QUESTION NO: 4
If you needed to transport traffic coming from multiple VLANs (connected between switches), and your
CTO was insistent on using an open standard, which protocol would you use?

A. 802.11B
B. spanning-tree
C. 802.1Q
D. ISL
E. VTP
F. Q.921

Answer: C

Explanation:
The act involved in the above question is trunking. The two trunking protocols in the answer choices are:
802.1Q and ISL. ISL is Cisco proprietary and IEEE 802.1Q is based on an open standard. When non-Cisco
switches are used along with Cisco switches and trunking is required, it is best to use the 802.1Q
encapsulation.
Incorrect Answers: