70-445, Microsoft 70-445 Exam
產品介紹
考試代碼: 70-445
考試名稱: TS:MS SQL Server 2005 Business Intelligence-Implem & Mainte
70-445 考試是 Microsoft 公司的 TS:MS SQL Server 2005 Business Intelligence-Implem & Mainte 認證考試官方代號，CramBible 70-445由全球領先的IT認證考試中心授權，幫助考生一次順利取得通過70-445考試； 否則將全額退款！保證您的利益不受到任何的損失。
總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對考試題庫的完整覆蓋。
更多 70-445 資源
相关产品
- 70-540(CSharp) Microsoft Windows Mobile Application Development
- 70-540(VB) Microsoft Windows Mobile Application Development
- 70-400 70-400 : TS:MS System Center Operations Manager, Configuring
- 70-541(CSharp) MS Windows SharePoint Srvcs 3.0 Application Development
- 70-541(VB) MS Windows SharePoint Srvcs 3.0 Application Development
- 70-544(CSharp) Ms Virtual Earth 6.0, Application Development
- 70-544(VB) Ms Virtual Earth 6.0, Application Development
- 70-556 Ms Office PerformancePoint Server 2007, Applications
- 70-656 Microsoft Desktop Optimization Pack, Configuring
- 70-639 MSOffice Proj Serv 2007, Config, For MS Cert Parthers
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1.Insert the rows that fail into a table.
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.
Answer: ADF
2. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package has the following features:
Two Data Flow tasks and two Control Flow tasks
A success constraint between each Data Flow task and the subsequent Control Flow task
The package uses one transaction for all the tasks.
You need to configure the package so that the two Data Flow tasks use their own transactions. You also need to ensure that each Control Flow task is enlisted in the same transaction as its preceding Data Flow task.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Change the TransactionOption property to Supported for the package.
B. Change the TransactionOption property to Required for the package.
C. Change the TransactionOption property to Supported for each Data Flow task.
D. Change the TransactionOption property to Required for each Data Flow task.
E. Change the TransactionOption property to Supported for each Control Flow task.
F. Change the TransactionOption property to Required for each Control Flow task.
Answer: ADE
3. Microsoft SQL Server Management Studio (SSMS) is installed on your workstation. Microsoft Business Intelligence Development Studio (BIDS) is not installed on your workstation.
You need to create a package that must meet the following requirements:
It must be transactional.
It must be optimized for 20 tables.
It must be stored securely in the msdb database of a remote server.
What should you do?
A. Create the package by using DTS Designer.
B. Create the package by using the Package Migration Wizard.
C. Create the package by using the Microsoft SQL Server Import and Export Wizard.
D. On the Microsoft SQL Server 2005 Integration Services (SSIS) menu, click the Create Package submenu.
Answer: C
4. You create 25 Microsoft SQL Server 2005 Integration Services (SSIS) packages on the development server. You decide to deploy the SSIS packages on the test server. You need to create a repeatable process that will allow you to deploy the packages to the package store on the test server if the packages change. You also need to ensure that this is achieved with minimum effort. What should you do?
A. Use Microsoft SQL Server Business Intelligence Development Studio (BIDS) to save each package to the remote server.
B. Use the dtutil utility in a batch file to deploy each of the package .dtsx files to the remote server with the /Fi option.
C. Copy the Microsoft SQL Server Business Intelligence Development Studio (BIDS) files to the remote server and build the SSIS project on the remote server.
D. Create a package deployment utility in Microsoft SQL Server Business Intelligence Development Studio (BIDS) and use the Deployment Wizard to deploy all the packages.
Answer: D
5. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package contains 30 Data Flow tasks and 30 Control Flow tasks. The package runs slower than expected. You need to capture the start time, the finish time, and the elapsed time for the validation and execution of the package. What should you do?
A. Enable the OnProgress event handler and use the Control Flow tasks to write the information to a log.
B. Monitor the Progress tab during the execution of the package, and then monitor the Execution Results tab.
C. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Service object. Analyze the output for the required information.
D. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Pipeline object. Analyze the output for the required information.
Answer: B
6. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package is named UpdateTable.dtsx and contains a variable named runID. The package must run by using the dtexec utility. The runID variable must be set at runtime to a value of 5. You need to meet the outlined requirements. What should you do?
A. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /SET packages.variables[runID].Value;5.
B. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /SET packages.variables.runID=5.
C. Create a text file that specifies the variable name and value in the format package.variables[runID].Value = 5. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /COM where
is the name of the file you just created.
D. Create a text file that specifies the variable name and value in the format runID=5. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /COM where is the name of the text file
you just created.
Answer: A
7. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package uses at least one sequence container in one transaction. Each transaction controls a Data Flow task and a Control Flow task. Each Data Flow task has a Success constraint.
The Control Flow task follows the Success constraint. The package must include the following requirements:
Each Data Flow task must use its own transaction.
The Control Flow task and the Data Flow task that precedes it must succeed or fail as an atomic unit.
A restart point must restart each Data Flow task and the Control Flow task that follows it as an atomic unit.
You need to make changes in the control flow designer to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add all the Data Flow tasks and the Control Flow tasks to one sequence container.
B. Add a sequence container for each Control Flow task and the Data Flow task that precedes it.
C. Change the FailPackageonFailure property to true for each new sequence container that is added to the package.
D. Change the FailPackageonFailure property to false for each new sequence container that is added to the package.
Answer: BC
8. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The OLE DB data source for the package is a database that is updated frequently.
You need to create a package that accomplishes the following tasks:
Implement the IRowsetFastLoad interface.
Support various data flow destinations.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use an OLE DB data flow destination.
B. Use a Recordset data flow destination.
C. Use a DataReader data flow destination.
D. Create separate data flow destinations within the same Data Flow task.
Answer: AD
2. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
While testing, a Transact-SQL user-defined function causes duplicate key values that stop the transformation.
To permit the transformation to continue, the package must perform the following tasks:
1. Ascertain which rows are affected.
2. Insert the rows that fail into a table.
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.
Answer: ADF
?>
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.
Answer: ADF
2. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package has the following features:
Two Data Flow tasks and two Control Flow tasks
A success constraint between each Data Flow task and the subsequent Control Flow task
The package uses one transaction for all the tasks.
You need to configure the package so that the two Data Flow tasks use their own transactions. You also need to ensure that each Control Flow task is enlisted in the same transaction as its preceding Data Flow task.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Change the TransactionOption property to Supported for the package.
B. Change the TransactionOption property to Required for the package.
C. Change the TransactionOption property to Supported for each Data Flow task.
D. Change the TransactionOption property to Required for each Data Flow task.
E. Change the TransactionOption property to Supported for each Control Flow task.
F. Change the TransactionOption property to Required for each Control Flow task.
Answer: ADE
3. Microsoft SQL Server Management Studio (SSMS) is installed on your workstation. Microsoft Business Intelligence Development Studio (BIDS) is not installed on your workstation.
You need to create a package that must meet the following requirements:
It must be transactional.
It must be optimized for 20 tables.
It must be stored securely in the msdb database of a remote server.
What should you do?
A. Create the package by using DTS Designer.
B. Create the package by using the Package Migration Wizard.
C. Create the package by using the Microsoft SQL Server Import and Export Wizard.
D. On the Microsoft SQL Server 2005 Integration Services (SSIS) menu, click the Create Package submenu.
Answer: C
4. You create 25 Microsoft SQL Server 2005 Integration Services (SSIS) packages on the development server. You decide to deploy the SSIS packages on the test server. You need to create a repeatable process that will allow you to deploy the packages to the package store on the test server if the packages change. You also need to ensure that this is achieved with minimum effort. What should you do?
A. Use Microsoft SQL Server Business Intelligence Development Studio (BIDS) to save each package to the remote server.
B. Use the dtutil utility in a batch file to deploy each of the package .dtsx files to the remote server with the /Fi option.
C. Copy the Microsoft SQL Server Business Intelligence Development Studio (BIDS) files to the remote server and build the SSIS project on the remote server.
D. Create a package deployment utility in Microsoft SQL Server Business Intelligence Development Studio (BIDS) and use the Deployment Wizard to deploy all the packages.
Answer: D
5. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package contains 30 Data Flow tasks and 30 Control Flow tasks. The package runs slower than expected. You need to capture the start time, the finish time, and the elapsed time for the validation and execution of the package. What should you do?
A. Enable the OnProgress event handler and use the Control Flow tasks to write the information to a log.
B. Monitor the Progress tab during the execution of the package, and then monitor the Execution Results tab.
C. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Service object. Analyze the output for the required information.
D. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Pipeline object. Analyze the output for the required information.
Answer: B
6. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package is named UpdateTable.dtsx and contains a variable named runID. The package must run by using the dtexec utility. The runID variable must be set at runtime to a value of 5. You need to meet the outlined requirements. What should you do?
A. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /SET packages.variables[runID].Value;5.
B. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /SET packages.variables.runID=5.
C. Create a text file that specifies the variable name and value in the format package.variables[runID].Value = 5. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /COM
D. Create a text file that specifies the variable name and value in the format runID=5. Execute dtexec /F "c:ssisPackagesUpdateTable.dtsx" /COM
Answer: A
7. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package uses at least one sequence container in one transaction. Each transaction controls a Data Flow task and a Control Flow task. Each Data Flow task has a Success constraint.
The Control Flow task follows the Success constraint. The package must include the following requirements:
Each Data Flow task must use its own transaction.
The Control Flow task and the Data Flow task that precedes it must succeed or fail as an atomic unit.
A restart point must restart each Data Flow task and the Control Flow task that follows it as an atomic unit.
You need to make changes in the control flow designer to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add all the Data Flow tasks and the Control Flow tasks to one sequence container.
B. Add a sequence container for each Control Flow task and the Data Flow task that precedes it.
C. Change the FailPackageonFailure property to true for each new sequence container that is added to the package.
D. Change the FailPackageonFailure property to false for each new sequence container that is added to the package.
Answer: BC
8. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The OLE DB data source for the package is a database that is updated frequently.
You need to create a package that accomplishes the following tasks:
Implement the IRowsetFastLoad interface.
Support various data flow destinations.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use an OLE DB data flow destination.
B. Use a Recordset data flow destination.
C. Use a DataReader data flow destination.
D. Create separate data flow destinations within the same Data Flow task.
Answer: AD
2. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
While testing, a Transact-SQL user-defined function causes duplicate key values that stop the transformation.
To permit the transformation to continue, the package must perform the following tasks:
1. Ascertain which rows are affected.
2. Insert the rows that fail into a table.
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.
Answer: ADF
線上諮詢,點擊進入