70-660, MicroSoft 70-660 Exam
產品介紹
考試代碼: 70-660
考試名稱: TS:Windows@ Internals
70-660 考試是 MicroSoft 公司的 TS:Windows@ Internals 認證考試官方代號，CramBible 70-660由全球領先的IT認證考試中心授權，幫助考生一次順利取得通過70-660考試； 否則將全額退款！保證您的利益不受到任何的損失。
總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對考試題庫的完整覆蓋。
更多 70-660 資源
相关产品
- 70-540(CSharp) Microsoft Windows Mobile Application Development
- 70-540(VB) Microsoft Windows Mobile Application Development
- 70-400 70-400 : TS:MS System Center Operations Manager, Configuring
- 70-541(CSharp) MS Windows SharePoint Srvcs 3.0 Application Development
- 70-541(VB) MS Windows SharePoint Srvcs 3.0 Application Development
- 70-544(CSharp) Ms Virtual Earth 6.0, Application Development
- 70-544(VB) Ms Virtual Earth 6.0, Application Development
- 70-556 Ms Office PerformancePoint Server 2007, Applications
- 70-656 Microsoft Desktop Optimization Pack, Configuring
- 70-639 MSOffice Proj Serv 2007, Config, For MS Cert Parthers
- 70-680 TS:Windows 7,Configuring
- 70-582 Windows Embedded Standard 7 for Developers
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1.You are developing a user mode application that contains two processes.
You need to allow the two processes to synchronize access to a shared data area.
Which synchronization primitive should you use?
A. Critical Section
B. ERESOURCE
C. Mutex
D. Spinlock
Answer: C
3. You have a device driver that has one monitoring thread named Thread1. The device driver has three worker threads named Thread2, Thread3, and Thread4. The worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at least once every 30 seconds, Thread1 calls KeBugCheckEx, and then a complete kernel crash dump is generated.
The computer generates a bug check and a complete kernel dump is generated.
You review the complete kernel dump and notice the following:
You need to identify the root cause of the bug check.
What caused the bug check to occur?
A. the priority of Thread1
B. the priority of Thread4
C. the state of Thread1
D. the state of Thread2 and Thread3
Answer: B
4. You develop a device driver for a PCI device. The PCI device runs on Windows Server 2003 computers.
You test the device driver's interrupt processing. The computer stops responding.
You need to locate the list of interrupt handling routines in the crash dump by using WinDbg.
Which command should you use?
A. !idt
B. !ipi
C. !irql
D. !isr
Answer: A
5. You develop a device driver for Windows XP that runs on uniprocessor systems only. The driver creates a system thread and a deferred procedure call (DPC). The DPC is invoked by a repeating timer.
The thread and the DPC must process entries from the same work queue.
You need to ensure that the system thread and the DPC are synchronized.
Which IRQ Level (IRQL) should you use?
A. APC_LEVEL
B. DISPATCH_LEVEL
C. LOW_LEVEL
D. PASSIVE_LEVEL
Answer: B
6. You develop a Windows device driver for a hardware device. The hardware device uses a simple direct memory access (DMA) controller. The hardware device does not perform virtual address translation.
You need to allocate a 64-KB buffer in Windows that accepts a DMA transfer of 64 KB from the hardware device.
Which routine should you use?
A. AllocateHeap(655536)
B. ExAllocatePoolWithTag(PagePool, 65536, 'abcd')
C. ExAllocatePoolWithTag(NonPagePool, 65536, 'abcd')
D. MmAllocateContiguousMemory(65536, 0xFFFFFFFF)
Answer: D
7. You are writing an I/O dispatch routine for a Windows device driver. The device driver supports buffered I/O. The dispatch routine transfers 1 KB of data to the user process.
You need to retrieve the kernel address of the 1-KB buffer from the I/O request packet (IRP).
Which field of the IRP contains the kernel address?
A. Irp->AssociatedIrp.SystemBuffer
B. Irp->Overlay.UserApcContext
C. Irp->Tail.Overlay.DriverContext[0]
D. Irp->UserBuffer
Answer: A
8. You plan to update a device driver on a Windows system. You download a copy of the device driver file from the Internet, but you are uncertain that the device driver is legitimate.
You need to verify the device driver's digital signature.
Which tool should you use?
A. Certmgr.exe
B. Certmgr.msc
C. Makecert.exe
D. Signtool.exe
Answer: D
2. You are developing an application.
You need to ensure that the application can read from COM port 10 by using the CreateFile function.
Which device name should you open?
A. "COM10"
B. "%COM10%"
C. "\COM10"
D. "\\.\COM10"
Answer: D
?>
You need to allow the two processes to synchronize access to a shared data area.
Which synchronization primitive should you use?
A. Critical Section
B. ERESOURCE
C. Mutex
D. Spinlock
Answer: C
3. You have a device driver that has one monitoring thread named Thread1. The device driver has three worker threads named Thread2, Thread3, and Thread4. The worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at least once every 30 seconds, Thread1 calls KeBugCheckEx, and then a complete kernel crash dump is generated.
The computer generates a bug check and a complete kernel dump is generated.
You review the complete kernel dump and notice the following:
You need to identify the root cause of the bug check.
What caused the bug check to occur?
A. the priority of Thread1
B. the priority of Thread4
C. the state of Thread1
D. the state of Thread2 and Thread3
Answer: B
4. You develop a device driver for a PCI device. The PCI device runs on Windows Server 2003 computers.
You test the device driver's interrupt processing. The computer stops responding.
You need to locate the list of interrupt handling routines in the crash dump by using WinDbg.
Which command should you use?
A. !idt
B. !ipi
C. !irql
D. !isr
Answer: A
5. You develop a device driver for Windows XP that runs on uniprocessor systems only. The driver creates a system thread and a deferred procedure call (DPC). The DPC is invoked by a repeating timer.
The thread and the DPC must process entries from the same work queue.
You need to ensure that the system thread and the DPC are synchronized.
Which IRQ Level (IRQL) should you use?
A. APC_LEVEL
B. DISPATCH_LEVEL
C. LOW_LEVEL
D. PASSIVE_LEVEL
Answer: B
6. You develop a Windows device driver for a hardware device. The hardware device uses a simple direct memory access (DMA) controller. The hardware device does not perform virtual address translation.
You need to allocate a 64-KB buffer in Windows that accepts a DMA transfer of 64 KB from the hardware device.
Which routine should you use?
A. AllocateHeap(655536)
B. ExAllocatePoolWithTag(PagePool, 65536, 'abcd')
C. ExAllocatePoolWithTag(NonPagePool, 65536, 'abcd')
D. MmAllocateContiguousMemory(65536, 0xFFFFFFFF)
Answer: D
7. You are writing an I/O dispatch routine for a Windows device driver. The device driver supports buffered I/O. The dispatch routine transfers 1 KB of data to the user process.
You need to retrieve the kernel address of the 1-KB buffer from the I/O request packet (IRP).
Which field of the IRP contains the kernel address?
A. Irp->AssociatedIrp.SystemBuffer
B. Irp->Overlay.UserApcContext
C. Irp->Tail.Overlay.DriverContext[0]
D. Irp->UserBuffer
Answer: A
8. You plan to update a device driver on a Windows system. You download a copy of the device driver file from the Internet, but you are uncertain that the device driver is legitimate.
You need to verify the device driver's digital signature.
Which tool should you use?
A. Certmgr.exe
B. Certmgr.msc
C. Makecert.exe
D. Signtool.exe
Answer: D
2. You are developing an application.
You need to ensure that the application can read from COM port 10 by using the CreateFile function.
Which device name should you open?
A. "COM10"
B. "%COM10%"
C. "\COM10"
D. "\\.\COM10"
Answer: D
線上諮詢,點擊進入