70-680, MicroSoft 70-680 Exam
產品介紹
考試代碼: 70-680
考試名稱: TS:Windows 7,Configuring
70-680 考試是 MicroSoft 公司的 TS:Windows 7,Configuring 認證考試官方代號，CramBible 70-680由全球領先的IT認證考試中心授權，幫助考生一次順利取得通過70-680考試； 否則將全額退款！保證您的利益不受到任何的損失。
總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對考試題庫的完整覆蓋。
更多 70-680 資源
相关产品
- 70-504(CSharp) MS.NET Frmewk 3.5, Workflow Foundation App Dev
- 71-571 TS: Microsoft Windows Embedded CE 6.0,Developing
- 70-660 TS:Windows@ Internals
- 70-686 Pro: Windows® 7, Enterprise Desktop Administrator
- 70-683 TS: Windows 7, Preinstalling for OEMs (English)
- 70-582 Windows Embedded Standard 7 for Developers
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1. You have a computer that runs Windows 7.
You discover that an application named App1 runs during the startup process.
You need to prevent only App1 from running during startup. Users must be allowed to run App1 manually.
What should you do?
A. From the local Group Policy, modify the application control policy.
B. From the local Group Policy, modify the software restriction policy.
C. From the System Configuration tool, select Diagnostic Startup.
D. From the System Configuration tool, modify the Startup applications.
Answer: D
2.You have a computer that runs Windows 7.
You run the Configure Backup wizard as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can back up the computer to a local disk drive.
What should you do before you run the Configure Backup wizard?
A. Connect a removable disk.
B. Log on as an administrator.
C. Start the Volume Shadow Copy Service (VSS).
D. Add your user account to the Backup Operators group.
Answer: A
3. You have a computer that runs Windows
You perform an image backup.
A virus infects the computer and causes the computer to become unresponsive.
You need to restore the computer as quickly as possible.
What should you do?
A. Start the computer by using the Last Known Good Configuration feature.
B. Start the computer from the Windows 7 DVD and then use the Startup Repair tool.
C. Start the computer from the Windows 7 DVD and then use the System Image Recovery tool.
D. Start the computer from Windows Preinstallation Environment (Windows PE) and then run Imagex.exe.
Answer: C
4. You have a computer that runs Windows 7. The computer has two volumes named volume C and volume D.
You create a document on volume D.
You manually create a restore point and modify the document.
You view the properties of the document as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can restore the current version of the document if the document is modified.
What should you do first?
A. Run Disk Cleanup on volume D.
B. Enable auditing on the document.
C. Turn on System Protection for volume D.
D. Start the Volume Shadow Copy Service (VSS).
Answer: C
5. You need to increase the size of a paging file.
What should you do?
A. From Disk Management, shrink the boot partition.
B. From Disk Management, shrink the system partition.
C. From System, modify the Advanced system settings.
D. From System, modify the System protection settings.
Answer: C
6. You have a computer that runs Windows 7.
You need to identify which applications were installed during the last week.
What should you do?
A. From Reliability Monitor, review the informational events.
B. From System Information, review the Software Environment.
C. From Performance Monitor, review the System Diagnostics Report.
D. From Performance Monitor, run the System Performance Data Collector Set.
Answer: A
7. A remote user has a computer that runs Windows 7.
The user reports that he receives several error messages while using an application.
You do not have remote access to the user's computer.
You need to tell the user how to create screenshots of the actions he performs on the computer. The solution must track the mouse actions that the user performs.
What should you instruct the user to do?
A. Press ALT+PrintScreen.
B. Run Psr.exe and then click Start Record.
C. From Mouse Properties, select Display pointer trails.
D. Run Snippingtool.exe, click New, and then click Window Snip.
Answer: B
8. You have a computer that runs Windows 7. You perform regular data backups and system image backups.
The computer experiences a hard disk failure. You replace the failed hard disk.
You need to recover the computer to the previous Windows 7 environment.
You start the computer from the Windows 7 installation media.
Which recover option should you select?
A. Command Prompt
B. Startup Repair
C. System Image Recovery
D. System Restore
Answer: C
?>
You discover that an application named App1 runs during the startup process.
You need to prevent only App1 from running during startup. Users must be allowed to run App1 manually.
What should you do?
A. From the local Group Policy, modify the application control policy.
B. From the local Group Policy, modify the software restriction policy.
C. From the System Configuration tool, select Diagnostic Startup.
D. From the System Configuration tool, modify the Startup applications.
Answer: D
2.You have a computer that runs Windows 7.
You run the Configure Backup wizard as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can back up the computer to a local disk drive.
What should you do before you run the Configure Backup wizard?
A. Connect a removable disk.
B. Log on as an administrator.
C. Start the Volume Shadow Copy Service (VSS).
D. Add your user account to the Backup Operators group.
Answer: A
3. You have a computer that runs Windows
You perform an image backup.
A virus infects the computer and causes the computer to become unresponsive.
You need to restore the computer as quickly as possible.
What should you do?
A. Start the computer by using the Last Known Good Configuration feature.
B. Start the computer from the Windows 7 DVD and then use the Startup Repair tool.
C. Start the computer from the Windows 7 DVD and then use the System Image Recovery tool.
D. Start the computer from Windows Preinstallation Environment (Windows PE) and then run Imagex.exe.
Answer: C
4. You have a computer that runs Windows 7. The computer has two volumes named volume C and volume D.
You create a document on volume D.
You manually create a restore point and modify the document.
You view the properties of the document as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can restore the current version of the document if the document is modified.
What should you do first?
A. Run Disk Cleanup on volume D.
B. Enable auditing on the document.
C. Turn on System Protection for volume D.
D. Start the Volume Shadow Copy Service (VSS).
Answer: C
5. You need to increase the size of a paging file.
What should you do?
A. From Disk Management, shrink the boot partition.
B. From Disk Management, shrink the system partition.
C. From System, modify the Advanced system settings.
D. From System, modify the System protection settings.
Answer: C
6. You have a computer that runs Windows 7.
You need to identify which applications were installed during the last week.
What should you do?
A. From Reliability Monitor, review the informational events.
B. From System Information, review the Software Environment.
C. From Performance Monitor, review the System Diagnostics Report.
D. From Performance Monitor, run the System Performance Data Collector Set.
Answer: A
7. A remote user has a computer that runs Windows 7.
The user reports that he receives several error messages while using an application.
You do not have remote access to the user's computer.
You need to tell the user how to create screenshots of the actions he performs on the computer. The solution must track the mouse actions that the user performs.
What should you instruct the user to do?
A. Press ALT+PrintScreen.
B. Run Psr.exe and then click Start Record.
C. From Mouse Properties, select Display pointer trails.
D. Run Snippingtool.exe, click New, and then click Window Snip.
Answer: B
8. You have a computer that runs Windows 7. You perform regular data backups and system image backups.
The computer experiences a hard disk failure. You replace the failed hard disk.
You need to recover the computer to the previous Windows 7 environment.
You start the computer from the Windows 7 installation media.
Which recover option should you select?
A. Command Prompt
B. Startup Repair
C. System Image Recovery
D. System Restore
Answer: C
用户反馈
- Michael at June-28th 2010
I passed 70-680 test with 920/1000 ! I am definitely going to use CramBible for future exams.
- Thank you . I took the test and passed. I have to say that crambible q&s were EXTREMELY helpful!
線上諮詢,點擊進入