74-134, Microsoft 74-134 Exam

您將一次輕鬆通過 74-134 考試!

研發團隊致力於國際上最新的各種IT認證，根據最新考試中心截屏所得原始題庫，IT培訓中心和考試中心IT工程師和IT認證專家精心整理製作完成各種IT認證題庫;我們密切跟蹤IT認證的最新動態和考試變化，及時提供最新的試題升級，覆蓋率100％以上,保證您一次通過認證考試。

我們如何保持100％通過率的產品?

我們在題庫致力於客戶的成功。我們的產品出品極為謹慎和專業。我們利用來自世界各地的業界領先的組織專業人員隊伍的經驗和知識。

'客戶的成功就是我們的成功'

74-134 考試是 Microsoft 公司的 Pre-Installing MS Products using the OEM Pre-Install Kit 認證考試官方代號，CramBible的 74-134 權威全真題庫是 Microsoft 認證廠商的授權產品，絕對保證第一次參加 74-134 考試的考生即可順利通過，否則將全額退款！保證您的利益不受到任何的損失。

CramBible確保您的成功，否則全額退款!

產品介紹

Pre-Installing MS Products using the OEM Pre-Install Kit 認證作為全球IT領域專家 Microsoft 熱門認證之一，是許多大中IT企業選擇人才標準的必要條件。 如果您正在準備 74-134 考試，CramBible是您成功的最佳夥伴;最新74-134權威全真考題題庫,幫助您一次通過Microsoft認證考試。

根據74-134考試的變化動態更新，所有購買CramBible 74-134認證考題的客戶都將得到90天的免費升級服務，保證了對74-134考試題庫的完整覆蓋。

總結：
1）基本上有6個步驟，您應該遵循自己的方式來獲得認證，即：
2）決定哪個認證適合您 - 獲取認證概述
3 瞭解具體的細節 - 查看具體認證要求的經驗
4）選擇考試夥伴 - 選擇具有10年歷史的認證CramBible，由資深IT工程師和IT認證專家編寫的PDF格式考試資料。
5）複習考試資料 - 認真地複習我們的學習指南。
6）註冊並參加您所需的考試 - 您可以登記PROMETRIC或Pearson VUE的考試中心。
7）我們的的客戶都將得到90天的免費升級服務，保證了對74-134考試題庫的完整覆蓋。

即可擁有No 1的白金服務團隊

我如何用你們的產品通過考試?
CramBible產品足以通過考試。 我們建議學員學習CramBible7天時間，將幫助您評估您的實際考試前的準備。 。

如何下載產品?
產品可以下載很容易從會員的帳戶，登錄後點擊訂購代碼或“查看”按鈕，開始下載。

產品是什麼格式的?
Adobe Acrobat PDF 文件.您下載的檔為RAR壓縮格式. 請訪問Winrar tool 3.0 plus version 解壓縮檔後用Adobe Acrobat reader閱讀

忘記密碼?
請訪問找回密碼.
輸入您的用戶名，我們會向您發送一封含有密碼的電子郵件.

我怎樣才能得到優惠？
如果您購買的是3個或3個以上的產品,請發電子郵件到 sales@crambible.com，將為您提供提供一個優惠的價格。

如果我失敗了怎麼辦？
不要擔心失敗;為您提供沒有通過考試的退款保證。 你無法通過相應的考試，可以要求退款的保證。點擊這裡更多細節。

需要幫助？
您可以隨時與客戶支援聯繫

線上諮詢,點擊進入 每天9:00-18:00

閱讀完整的常見問題解答

4步輕鬆得到產品

1. 選擇產品加入購物車
通過 "搜索" or "所有產品" 找到您需要的產品, 點擊"Add to cart" 按鈕, 加入購物車.

2. 登錄帳戶
點擊 頁面頂部的 "註冊" 按鈕, 成為本網站的正式成員。 （已註冊用戶，可以點擊“登錄”直接。）

3. 付款
我們提供的付款方式包括 線上支付（Visa/Master/Paypal） 和 西聯匯款。 大多數客戶使用線上支付，購買過程支持各種信用卡和銀行借記卡付款。沒有任何額外費用。

4. 下載
確認付款後，您可以即刻訪問您的會員中心，下載產品。

1. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer.
You installed OPKTools from Microsoft Windows? XP Service Pack 2. You run Setup Manager and create a configuration set to install a Microsoft Windows operating system.
You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.
You get the following error message: Cannot Authenticate to the Server.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Verify that the passwords used for connecting are the same in the configuration set and on the floppy disk.
B. Verify that the Gateway= parameter is included in the winbom.ini answer file.
C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.
D. Verify that the network interface card in the master computer is plugged in to the crossover cable.
Answer: AB


2.You run Setup Manager and create a configuration set to install a Microsoft Windows operating system.
You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.
You get the following error message: Cannot Authenticate to the Server.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Verify that the passwords used for connecting are the same in the configuration set and on the floppy disk.
B. Verify that the Gateway= parameter is included in the winbom.ini answer file.
C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.
D. Verify that the network interface card in the master computer is plugged in to the crossover cable.
Answer: AB

2. You are a system builder.
Your network is using a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have installed a media reader card in a computer, and you use OPKTools to preinstall this computer over the network. In Audit mode you discover that the media card reader device has failed and that it is not enumerated in Device Manager.
You need to preinstall your computers with this card reader.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of the unattend.txt answer file to preinstall the unsigned driver.
B. Remove the incorrect driver that was installed.
C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of the unattend.txt answer file.
D. Obtain an updated driver (if one exists) from the manufacturer.
E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.
F. Add the DriverSigningPolicy=Block parameter in the Unattended section of the unattend.txt answer file.
Answer: AD

3. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 computer that is running the Dynamic Host Configuration Protocol (DHCP) service.
You create a configuration set for a Microsoft Windows Small Business Server 2003 installation and preinstall a computer for your customer. You create the directory Sysprep and copy all the necessary files into this folder. You then run sysprep on the computer by using the following command: C:SysprepSysprep.exe -dc ????�??Creseal.
You reboot the computer and receive the following error: LSASS.EXE - System Error.
What should you do?
A. Use the OEM version of Windows Small Business Server 2003.
B. Use the MSDN version of Windows Small Business Server 2003.
C. Use an open-license version of Windows Small Business Server 2003.
D. Use the Retail version of Windows Small Business Server 2003.
Answer: A

4. You are a system builder.
Your network is using a four-port router that is running Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set by using OPKTools.
When you attempt the preinstallation on a new computer, you find that the hard drive is not formatted correctly. You open the winbom.ini answer file in the configuration set, and you see the following:
[Disk1.config]
Size1 = *
PartitionType1 = PRIMARY
FileSystem1 = NTFS
QuickFormat1 = YES
You need to perform an unattended preinstallation of Microsoft Windows on three new computers that you are shipping to customers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add Wipe Disk=Yes to the winbom.ini answer file.
B. Add SetActive1=Yes to the winbom.ini answer file.
C. Change Size1=* to Size1=10000 in the winbom.ini answer file.
D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.
Answer: AB

5. You are a system builder.
The company network is not functional, and there is no network access to the technician computer. You need to preinstall Microsoft Windows? operating systems on three computers. You have three copies of the Windows operating systems.
You have decided to use a winnt.sif file to perform a Windows CD-based preinstallation on these computers. You manually create a winnt.sif file and copy it to three floppy disks. You place a CD of each Windows operating system in the DVD drive of each computer. You start each computer.
When you see the initialization screen on each computer, you insert the floppy disk with the winnt.sif file on it into each computer. Two of the computers are preinstalled properly. The third computer, however, begins the preinstallation process but stops with the command prompt window open and the cursor at D:i386System32.
You need to preinstall the third computer.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Remove the CD from the drive, clean it, and begin the process again.
B. Check the Hardware Compatibility list to make sure that all hardware is compliant.
C. At the command prompt, type ipconfig /all to make sure that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the adapter.
D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD drive and place the Windows operating system CD into the DVD drive.
Answer: BD

6. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2.
You want to set a static Internet Protocol (IP) address for the Microsoft Windows Preinstallation Environment on the computer that you are installing for your customer. During the preinstallation process, you receive the following error message: Cannot Authenticate to Server.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.
B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.
C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.
D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.
Answer: AD

7. You are a system builder.
You have a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. You are using a computer running Microsoft Windows? 2000 Professional as your technician computer.
You have created a configuration set and are using the following winbom.ini file to install the network drivers:
[PnpDrivers]
| \opktoolsdriversChipset = Chipset
| \opktoolsdriversvideo = video
| \opktoolsdriversAudio = Audio
| \opktoolsdriversModem = Modem
| Username = opk
| Password =
| [PnpDriverUpdate]
| WaitForPNP = YES
| TargetRoot = WindowsOEMdrivers
| UpdateInstalledDrivers = No
When you run the preinstallation, your updated drivers are not installed.
You need to install updated drivers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Include the OEMPnPDriversPath parameter in the PnPDriverUpdate section of the winbom.ini file.
B. Remove the username and password parameters in the PnPDrivers section. Place them in the PnPDriverUpdate section.
C. Change the WaitForPnP=Yes parameter to WaitForPnP=No.
D. Remove lines in PnPDrivers section to only include \opktoolsdrivers = drivers.
E. In the PnPDrivers section,change UpdateInstalledDrivers=No to UpdateInstalledDrivers=Yes.
Answer: BE

8. You are a system builder.
Your network is using a four-port router running Dynamic Host Configuration Protocol (DHCP). Your technician computer is running Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have created a configuration set by using the OPKTools specified for use in preinstalling Microsoft Windows on three computers. You have the Microsoft Windows Preinstallation Environment CD from a three-pack of CDs for Microsoft Windows XP Professional. You start the Windows Preinstallation Environment CD on one of the computers and find that Windows Setup stops. You receive an error message stating that your Product Key is missing or invalid.
You need to perform an unattended installation of Windows without producing this error.
What should you do? (Each correct answer presents part of the solution. Choose two).
A. Verify that a Product Key is included in the oobeinfo.ini answer file.
B. Verify that a Product Key is included in the unattend.txt answer file.
C. Verify that the Product Key in the oobeinfo.ini answer file matches the SKU that is being installed.
D. Verify that the Product Key in the sysprep.inf answer file matches the SKU that is being installed.
E. Verify that a Product Key is included in the sysprep.inf answer file.
F. Verify that the Product Key in the unattend.txt answer file matches the SKU that is being installed.
Answer: BF